Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Circlip pliers.
 
the ring goes on after, you aren't supposed to put the ring on then push it through. You need circlip/snap ring pliers, promise. There's no other way to open those things up without sending them across the room, especially in that location.
computer boot sits on the stud, snap ring gets put on afterwards
 
Put the boot in some almost boiling water to soften it up. It should become flexible enough to snap it back over the nub. Then have at it with the circlip pliers.
 
the ring goes on after, you aren't supposed to put the ring on then push it through. You need circlip/snap ring pliers, promise. There's no other way to open those things up without sending them across the room, especially in that location.
computer boot sits on the stud, snap ring gets put on afterwards
I will keep trying !
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom