Divelink-underwater communication-help?!
- Thread starter AQUAFILM
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Jay_SMART_Diver
Contributor
From Dive Link Website:
Single Channel
Transmission Type: Wireless ultrasonic. Modulation: Upper Band no carrier, ref. frequency 31250 Hz.
Signals: Emergency Signal Low power beep at 488 Hz. short burst every 8 seconds into local earphone; communications can continue.
Transmission: 1.0 watts to 10.0 watts peak output power Fully automatic voice operated transmission (VOX) with transmitted speech returned to earphone. Audio pass band 400 Hz. to 5000 Hz. normal voice range.
Single Channel
Transmission Type: Wireless ultrasonic. Modulation: Upper Band no carrier, ref. frequency 31250 Hz.
Signals: Emergency Signal Low power beep at 488 Hz. short burst every 8 seconds into local earphone; communications can continue.
Transmission: 1.0 watts to 10.0 watts peak output power Fully automatic voice operated transmission (VOX) with transmitted speech returned to earphone. Audio pass band 400 Hz. to 5000 Hz. normal voice range.
If you're looking for something that is compatible with DiveLink, the SSB-2010 can be used on channel three. http://www.oceantechnologysystems.com/ssb_2010.shtml
What is it that you need?
What is it that you need?
Similar threads
