DIY Tank strap
- Thread starter Kwjybo
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
West Indiaman
Registered
DIY cam bands I just finished:
Parts used:
2x friction pads from eBay ($6)
2x SS buckles from eBay ($12)
2x SS triglides
DirZone webbing (2x120cm)
2" wide bicycle inner tube
DirZone webbing turned out to be somewhat thicker than expected, so I had to flatten the ends with a butane torch and hammer, then pull them through the triglides with pliers. I doubt they'll come loose on their own.
Parts used:
2x friction pads from eBay ($6)
2x SS buckles from eBay ($12)
2x SS triglides
DirZone webbing (2x120cm)
2" wide bicycle inner tube
DirZone webbing turned out to be somewhat thicker than expected, so I had to flatten the ends with a butane torch and hammer, then pull them through the triglides with pliers. I doubt they'll come loose on their own.
Similar threads
