FS: Vintage and not-so-Vintage Gear

[Anony]

I got all this gear a couple of days ago in an estate sale. Apparently the previous owner was a diver. I'd Really like to keep a few of these things but money is tight at the moment. Everything is up for sale.
Paypal only, buyer pays estimated shipping cost,
(Cash is fine for local pickup.)
I am hoping for ~$50 on the single stage regs, the rest is open to offers.
The following things are taken
[red]
The Fuzzy USD reg (The fuzzy aqualung 1st stage) for 10$
White stag buckle For 2$
the single stage "Mistral" Aqua-lung for 50$
Possibly the dive computer, both the knives, and the horse collar bc's for 40$
(Dive computer 15$, 2 knives 10$, 2 bc's for 15$)
[/red]

Regulators:
AMF Swimaster MR12
Same brand First+2nd stage+pressure gauge
2nd stage serial: 22167
1st stage serial: b18473

Poseiden Cyklon 300
1st stage serial: 42948
2nd stage, didnt find serial, 1 small dent.
Dacor depth/pressur gauges attached.

ScubaPro
Unlabelled metal regs
1st stage completely unlabelled.
2nd: 3905132
2nd: 790156
with "1st wave" depth and pressure
gauges in an old 3 gauge console

Another unlabelled set, seems like the same 2nd:
1st stage has "scubapro" screw
2nd: 7506748
Scubapro pressure gauge.

Dacor
Metal reg
Wasnt able to get a good picture of it.
I'll go get more info off it later.

Aqua-Lung
First stage only.
(Had trouble getting a decent picture)

Single Stage Regulators
Aqua-Lung
Mistral 1 stage with original hoses
I'm hoping for about 50$ on this

Survivair
1 stage regulator with full facemask
Its cool. I wonder how you clear your ears while
wearing a full face mask
Hoping for at least 50$ on this, I tested it and it breathes fine in my
garage.

Split so I can post all the pictures...

 

[Anony]

BC's
Tusa
Jacket style, I believe it says "TU Space
Academy" or similar on the logo.

ScubaPro
Jacket style BC. I blew it up but it didnt hold
air for more than 20 minutes.

SeaPro Inc.
I am not 100% sure but this seems to be a
back-inflate with integrated weights.
The weights are in the plastic backplate
in the form of leads balls.
Dumped by pulling a wire.

Horse-Collar BC
Seatec
Horse-Collar style, note the lack of
power-inflator. Holds air fine.

ScubaPro
It is blue, and has a power inflator.
I didnt blow it up, but I did notice some weird
valvue under the back pocket.
I'm interested as to what they are.

Accessories:
Farallon Shark Knife with holster
Vintage Scuba Online. Sea Hunt, Voit, Healthways, Sportsway, Aqua Lung and More!
Large scary z90 knife

US Divers 3-pane mask

Ancient Dive computer.

Various Neoprene stuff. Most of it has an uncomfortable white lining.

Snorkel
ScubaPro, j type. No valves or modifications.

Lead weights
Made for weight belts, these seem to be homemade.
I have about 100lbs worth, and the mold.
(the weights I have lots of are the square type pictured below)

 

[Anony]

Clam/Lobster measuring bars

Various metal and plastic buckles.

Deep See Dive bag
Its pretty messed up, all dry and sticky zippers.

ScubaPro Jetfins
Probably good when they are new, these older ones tend
to fall apart.

Yellow Tank
Most certainly out of hydro, and I dont think my dive
shop would even fill it due to it's age. I might ask
them for 1000lbs or so for use when rebuilding regs.

Mystery items:
If you know what these are please tell me.

Sorry for not making price suggestions, I might add some when I get time to look them up.
Thanks for looking. - Anony

 

[Boiler_81]

PM sent on the Mistral

 

[Anony]

PM sent on the Mistral

You've got dibs on it, but I'm going to wait a day and see if anyone offers me more than I'm asking. I'd estimate shipping at about 12$ and I'll pay out of pocket if its more than that.

 

[OR-Diver]

The bottom item (with the string) is an actuator, probably for one of the collar BCs. You screw a CO2 cartridge into it and when you pull the string, it punches a hole in the seal and inflates the collar. It might connect to the strange valve you talk about on the blue collar.

 

[lefemme36]

can you list some prices?
namely:
lobster and clamming tools
poseidon regs
jet fins? (ans size)

 

[DA Aquamaster]

You referenced:
Possibly the dive computer, both the knives, and the horse collar bc's for 40$
I'd pay $40 for that.

-----

The SeaPro BC is a reincaranation of the Waterill ATPac. It was basically a plastic plate and wing with a hollow section to hold weight in the form of lead balls and marbles to take up the extra space and adjust trim. It used a proprietary quick disconnect - but it happens to be identical to the one on common use now - it will just need a short inflator hose. The Seapro just added a jacket type harness rather than 2" webbing.

 

[Ltstanfo]

I got all this gear a couple of days ago in an estate sale. Apparently the previous owner was a diver. I'd Really like to keep a few of these things but money is tight at the moment. Everything is up for sale.
Paypal only, buyer pays estimated shipping cost,
(Cash is fine for local pickup.)
I am hoping for ~$50 on the single stage regs, the rest is open to offers.
The following things are taken
[red]
The Fuzzy USD reg (The fuzzy aqualung 1st stage) for 10$
White stag buckle For 2$
the single stage "Mistral" Aqua-lung for 50$
Possibly the dive computer, both the knives, and the horse collar bc's for 40$
(Dive computer 15$, 2 knives 10$, 2 bc's for 15$)
[/red]

PM Sent for the Farallon Shark Dart.

Regards,
Ltstanfo

 

[Anony]

[red]
The shark dart, the decompression computer and the mistral have all been shipped to thier new owners.
the metal scubapro 1st and two 2nd's with gauges in an old 3-style console
The white stag metal buckle and Fuzzy aqualung reg are sold, probably shipping later today.
[/red]
edit: I am moving this to the top. I keep getting pm's about that shark dart, some with much higher offers than it sold for :/

Everything else is still up for grabs.
I am also considering selling the valve from that tank since the tank is too old to get refilled.
Let me know.


DA Aquamaster: The computer and sharknife are gone, but those prices are firm. PM me a list of what you want and I'll pm you my paypal address.
So far you are the only one to express real interest in those collar bc's, although supposedly someone's friend will pm me soon with information.
Whoever buys those will get the little actuator free, I have no need for it.

lefemme36:
For the lobster/clamming tools I'd send them to you for 5$+shipping.
For the cyklon set I am hoping for about 50$+shipping the price is high because Google tells me that the second stage is the same design as the modern cyklon 5000, and they go for much more. Note however that the fitting where it attaches to the first stage is an odd standard. Possibly metric.
[red]edit:

I called a few guys on the dive team I am on about that poseiden reg, apparantly that is the metric version from Europe. If at any point a US hose was threaded into ANY port, then the 1st stage is completely useless as any subsequent thread has such a high risk of a blow out.... I was just reading your new post on the thread, and it does resemble the new cyklon, but is nothing like it at all on the inside. Completely different parts, and the parts kits for the one you have is somewhat hard to come accross.

[/red]
Apparently my googling was incorrect, please do not make any offers on the cyklons just yet, I am going to do some more research before selling them.
[/red]



Is there anything else I can do for you guys? More pictures?
Some people have asked so they could compare shipping: I am in California, just outside of sacramento.