• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

g250 i brought

Discussion in 'Repairing your own Gear' started by bertiebasset, Aug 11, 2014.

  1. bertiebasset

    bertiebasset Angel Fish

    # of Dives: 25 - 49
    Location: helsinki finland
    39
    1
    8
    hi thought I would post some pics if anyone still has a brass orifice any chance pm me thanks to rsingler to getting me started on a collection:D this one I worked on today have I set to 1.5 inches h2o shame had to use plastic orifice though oh and my expensive tool in the top left the bucket
     

    Attached Files:

  2. Zung

    Zung Loggerhead Turtle

    # of Dives: 500 - 999
    Location: Geneva, Switzerland
    1,641
    288
    83
    You can live happily ever after with the plastic orifices. I think I have 3 with this, and maybe 5 with the brass orifice, and, in use, the difference is REALLY hard to tell; on the "bench", they all crack at 22mm/.9" of water, and don't change much with use or storage: some of them have about 100 dives, and other 0.
     
  3. bertiebasset

    bertiebasset Angel Fish

    # of Dives: 25 - 49
    Location: helsinki finland
    39
    1
    8
    Thanks zung just leaving her a day to settle down then check the cracking pressure again ��
     

Share This Page