• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Good service!

Discussion in 'Wetwear' started by Old Diver, Jun 21, 2014.

  1. Old Diver

    Old Diver Solo Diver

    # of Dives: 200 - 499
    Location: Still in S. Fla.
    80
    0
    6
    Just wanted to say; I had a wetwear custom that I have had for around 8 or 9 years. The seam in the arm failed. It was repaired at a very moderate cost and in a short time. I do have the advantage of being within driving distance, but the service was excellent. As a hint, the failure was in the shoulder, but was probably caused by the red neoprene failing in the high stress zone, the black was not affected. keep high-load joints all black, it is tougher in use.
     

Share This Page