• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

HOG D1 leak at swivel

Discussion in 'Edge Gear' started by molasses, Sep 13, 2018.

  1. molasses

    molasses Garibaldi

    # of Dives: 1,000 - 2,499
    Location: Florida Keys
    2
    0
    1
    Does this 1st stage reg have a history of leaks at the swivel? Have 2 of them and they both have a small leak at swivel.
    Took apart and see that there isn't a defined groove for oring, maybe a large amout of cristal lube required?
    Any thoughts?
    Thanks
     
  2. The Chairman

    The Chairman Chairman of the Board

    # of Dives: I just don't log dives
    Location: Cave Country!
    55,678
    22,933
    113
    I've never had one leak... were they repaired recently?
     
  3. molasses

    molasses Garibaldi

    # of Dives: 1,000 - 2,499
    Location: Florida Keys
    2
    0
    1
    they have not been rebuilt recently
     
  4. Scuba Scott

    Scuba Scott Instructor, Scuba ScubaBoard Supporter

    327
    205
    43
    If you service the first stage and full seat the thrust seal and tighten the diaphragm retainer cap it will solve the problem. How many dives are on it now, have you tried to tighten the diaphragm retainer with a #5 hook spanner?
     
  5. Caveeagle

    Caveeagle Rebreather Pilot

    # of Dives: 500 - 999
    Location: High Springs, FL
    1,464
    951
    113
    Are you talking about the low pressure turret?

    I have several D1s and have never had one leak from the turret. I will comment that the torque/attachment for the turret is inside behind the 5th port. So if you either under torque the turret retainer, or over-torque a plug or hose into the 5th port, you could cause a problem when you unscrew things.
     

Share This Page