Hollis DG03 mac driver

[justcallmecam]

Hi,
Has anyone had any luck getting the DG03 to work on a mac? I'm trying to get it working for mac dive and/or sub surface.
I have tred these with no luck so far.

Virtual COM Port Drivers

http://www.ftdichip.com/Drivers/VCP/MacOSX/FTDIUSBSerialDriver_v2_2_18.dmg

I'm not all that computer savvy so maybe I'm just missing something.

Any help appreciated. thanks.
​

​

 

[buddhasummer]

It should work with MacDive. Make sure correct port is selected, I ran into this problem yesterday trying to download my Suunto, go into advanced setting and check what serial port it's trying to use. And of course make sure you have selected transfer on your DG. Good Luck.

---------- Post added November 21st, 2013 at 02:12 AM ----------

I assume you downloaded the driver.

---------- Post added November 21st, 2013 at 02:14 AM ----------

Is it giving you an error message, Code-4 or Code-6?

 

[SSpiffy]

You might want to check out DiverLog, claims to work with Hollis and I've had zero problems using it with my Oceanic VT-4.0.

Diverlog

 

[justcallmecam]

cheers guys,
I get my gear from the dive centre tomorrow and will have a play....

 

[justcallmecam]

it worked with the full version of macdive, don't know what i was doing wrong but all is good now.
Thanks.

 

[buddhasummer]

it worked with the full version of macdive, don't know what i was doing wrong but all is good now.
Thanks.

Cool, congrats.