Housing of DX-2G: once in how long to replace buttons O-rings (if at all)?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

A_kaza

Registered
Messages
8
Reaction score
0
Hello,

In the past I used Motormarine-IIEX (for 13 years) and for the last ~10 years of them I used to perform the annual maintenance myself,
replacing all the small O-rings of all the controls of the camera and the YS-60 strobe.
For the last 1.5 years I own the DX-2G and YS-110a strobe and I would like to know what are the periodic replacement
recommendation for the small O-rings of the housing buttons (the main O-ring I replace annualy)?

Is it once a year?
Is it once in few years?
Never?

TIA,
A_kaza.
 
Hi-
Service will depend upon your usage - over 50+ dives/year an annual service and pressure test on the housing is recommended. Replace the main body o-ring and strobe battery cap assembly o-ring as necessary with wear, but at least annually. Please contact your local distributor or dealer for service and parts information.
 

Back
Top Bottom