For Sale LP 95's Double set with AL40 & LP 72's

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

kidspot

Contributor
Scuba Instructor
Divemaster
Messages
4,854
Reaction score
12
Location
Moses Lake, Washington
# of dives
500 - 999
ALL SOLD - THANK YOU!

Details:

LP 95's Kit
  • Last Hydro 9/15
  • Faber LP 95's (if memory serves correctly on the brand - I got them used and they were cold galvanized which makes them hard to read)
  • Dive Rite 300 BAR DIN Manifold & Modular valves
  • Right hand valve was damaged and needs replacement (I only noticed it yesterday - apparently during the last Hydro they used a large wrench on the valve head and bent it just enough that the regulator won't thread properly ... grrr)
  • 1 donut included to convert to yoke for filling
  • 8" SS Bands
  • Catalina S40 labeled for Oxygen
  • None of these cylinders have been filled since last Hydro
  • $300 for the package if you can arrange pick up in Moses Lake or Wenatchee, Washington
LP 72's
  • LP 72's - with convertible DIN valves and boots
  • last Hydro 10/13
  • $100 takes both if you can arrange pickup.
  • Cylinders have not been filled for 3 years.
Delivery can be worked out in the Pacific Northwest (Washington, Oregon or B.C.) as I'll be travelling through most of those states in the next few months.

Aloha, Tim

IMG_9561.JPG IMG_9562.JPG IMG_9564.JPG IMG_9565.JPG IMG_9566.JPG IMG_9567.JPG IMG_9568.JPG IMG_9558.JPG IMG_9559.JPG IMG_9560.JPG


IMG_9561.JPG
IMG_9562.JPG
IMG_9564.JPG
IMG_9565.JPG
IMG_9566.JPG
IMG_9567.JPG
IMG_9568.JPG

The damage is hard to show in the above picture - it is just slight enough that the valve will start to thread but not very far - simple to replace :)

IMG_9558.JPG
IMG_9559.JPG
IMG_9560.JPG
 
Last edited:
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom