deepdiverbc
Contributor
Interesting. I didn't know about microbiolites and some of them looked pretty big. Thanks for the report
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
The last one in the video was as big as a freezer! (maybe that's the fisherman in me speaking)
Sable, I just drilled a hole through the Al flatbar and used the knob bolt thing that came with my camera. It is a simple Intova IC 800. The bar was a little flexy so I am adding a second flatbar across the top to stablize it. 3' long, 1" wide Al flatbar $12 at Rona or Home Depot. 1" PVC 45degree elbows and Tee joints are bungeed onto the ends for light articulation and my lights slide into them.
Do you know about Metal Supermarkets? They have one store here in Langley just behind the Sportsplex, a block away from Colossus. You can find all sorts of bars, angles, I-beams, etc, made up of all sorts of metals. There are no minimum quantities to buy. You may be able to find something less bendy than a flatbar without having to sandwich it with a 2nd bar to stabilize it.The bar was a little flexy so I am adding a second flatbar across the top to stablize it.
Again, I'm not 100% on this info, abnd I'm not even sure how to look up the info to check it for myself.