Redleg_Bravo
New
I have a Vyper Air that does not have the PC setting to download dives to the SDM.
PC Mode
- Thread starter Redleg_Bravo
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
If you write down the steps you are using to download it a lot easier to troubleshoot.
Hendrik@Suunto
Contributor
- Messages
- 394
- Reaction score
- 30
Redleg_Bravo,
Your Vyper Air does not have a PC setting. As long as Suunto DM4 is downloaded and the cable drivers have been installed then you should be able to plug in and download. Once your Vyper Air is plugged in, "data transfer" will appear on the screen of your Vyper and the download will initiate.
Best Regards,
Chris from Suunto
Your Vyper Air does not have a PC setting. As long as Suunto DM4 is downloaded and the cable drivers have been installed then you should be able to plug in and download. Once your Vyper Air is plugged in, "data transfer" will appear on the screen of your Vyper and the download will initiate.
Best Regards,
Chris from Suunto
Your lucky. Mine goes in data transfer mode as soon as it gets wet
Similar threads
