Port / Gears for Tokina 11-16mm
- Thread starter swagdan
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
SEA&SEA
Contributor
**********UPDATED 7/13/10 WITH GEAR IMAGES FROM TEST*************
HI-
For the 11-16 and a DX or MDX housing, a possible configuration is the 56401 Fisheye Dome + 56111 Ext ring 40 and 31114 zoom gear (requires removal of lens rubber shroud - seep attached images).
The RDX housing would be 30109 RDX port base L + 56601 Compact Dome and 31114 zoom gear. Or the 30109 + 30104 Optical dome and 31114 zoom gear (requires removal of lens rubber shroud - seep attached images).
Please note that these combinations have not been tested for optical quality and are only recommended based on product specs. System charts are updated by Japan annually. Any further information, we will post.
HI-
For the 11-16 and a DX or MDX housing, a possible configuration is the 56401 Fisheye Dome + 56111 Ext ring 40 and 31114 zoom gear (requires removal of lens rubber shroud - seep attached images).
The RDX housing would be 30109 RDX port base L + 56601 Compact Dome and 31114 zoom gear. Or the 30109 + 30104 Optical dome and 31114 zoom gear (requires removal of lens rubber shroud - seep attached images).
Please note that these combinations have not been tested for optical quality and are only recommended based on product specs. System charts are updated by Japan annually. Any further information, we will post.
Last edited:
Similar threads
