Question about Perdix and Transmitter Rubber O-rings

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

cmcdarris

Registered
Divemaster
Messages
36
Reaction score
13
Location
North Carolina
# of dives
200 - 499
I like that the Perdix has double O-rings on the battery compartment “cap”. However, the transmitter only has 1 O-ring on the battery compartment. I just got my Perdix last fall and am wondering how often these O-rings should be changed. I’m thinking 1x every year. Any experience or thoughts?
 
I replace mine annually when I replace the battery.
 
I wonder why Shearwater didn't include a spare or two in the box.
I mean they did include a pair for the unit battery - why not the transmitter?

I'm only asking because its difficult if not near impossible to find shearwater-grade o-rings here.
 
"shearwater grade o-rings?" that's a new one.
 
Size AS568-016, Nitrile (Buna-N) A70 2x
Where have you seen a specification of an -016, please? That is a much thinner oring, and I would be surprised if it sealed reliably. The -112 is what I use.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom