Razor bolts

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

rjack321

ScubaBoard Supporter
ScubaBoard Supporter
Messages
12,937
Reaction score
9,107
Location
Port Orchard, Washington State
# of dives
1000 - 2499
Hi Tobin, I did a little search here and didn't find what I was looking for. I have a partially cross-threaded bolt on my Razor. Its the bolt attaching the wing to the SS loop for bungie at the bottom. What's the threading on that bolt? I have both metric and imperial taps and should be able to clean up the threads. Its been a good reminder to use anti-seize.
Thanks.
 
Hi Tobin, I did a little search here and didn't find what I was looking for. I have a partially cross-threaded bolt on my Razor. Its the bolt attaching the wing to the SS loop for bungie at the bottom. What's the threading on that bolt? I have both metric and imperial taps and should be able to clean up the threads. Its been a good reminder to use anti-seize.


Thanks.

1/4" diameter x 28 threads per inch, i.e. UNF 1/4 x 28

Tobin
 
https://www.shearwater.com/products/teric/

Back
Top Bottom