Rigging stage spg

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

teckhead

Registered
Messages
51
Reaction score
0
Location
Australia (Brisbane)
Hi all, can someone let me know what is being used to hold the SPG in place when using stage tanks, and how is the SPG routed in place?
 
With the first stage in place and the SPG coming off the bottom, bend the hose behind the reg, then slide an already-prepared loop of cave line up to near the ends of the hose assemblies. When you release the SPG, the line should become taut.

It may take you a few tried to get the length of the line just right.
 
When I was slinging a pony stage-style, I just used a peice of inner tube.
 
i use inner tube also.
i just carry an old tube in my bag and cut off pieces as we need them.
 
https://www.shearwater.com/products/teric/
http://cavediveflorida.com/Rum_House.htm

Back
Top Bottom