• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Scubapro Mark VII and AIR 1 - Who still services them?

Discussion in 'Regulators' started by rockinrebel, Jul 4, 2012.

  1. rockinrebel

    rockinrebel Nassau Grouper

    # of Dives: 100 - 199
    Location: Richmond Hill, Georgia
    105
    22
    18
    I have a Scubapro Mark VII (yep, the one that honks) and an AIR 1 second stage. This is the later one with the 3000 PSI rating. I was just told by a semi-local dive shop (authorized Scubapro dealer) that you can't get parts for the Mark VII anymore.
    Is this true? If not where can I send my regulator for annual servicing?
    Thanks so much for your help. I love that old regulator. Breathes fantastic.
    Chuck
    Richmond Hill, Georgia
     
  2. Fishpie

    Fishpie Instructor, Scuba

    # of Dives: I'm a Fish!
    Location: Fort Lauderdale
    1,686
    249
    63
    I believe the 7 uses pretty much the same service parts as the 5......and the 5 is still supported.
    I also think the Air 1 can be serviced with the D series kit.
     
  3. redacted

    redacted Guest

    While Scubapro may no longer be producing kits specifically for those regs, all the annual parts required to service them are readily available to support other models. So, either your shop is trying to fool you into retiring your gear or they are not qualified to service it anyway. In either case, find another shop or service center.
     

Share This Page