Scubapro mk11/c370

[Nicholas_R634]

i have a Scubapro mk11/C370 right now with a yoke fitting, if I return and get a din fitting one will I have any trouble with hp steel tanks such as faster wear and tear or will everything be just fine.
Also I have seen on websites it says it’s cold water rated but some websites say it isn’t , what’s the coldest this reg can withstand

 

[buddhasummer]

The MK11 is not cold water rated, it's cousin the MK17 is. Generally anything under 10 degrees or 50f is considered cold in relation to first stages.

 

[Nicholas_R634]

I don’t see our Texas lakes getting below 50 , but bummer about that, so you know about the pressure rating of the exact first stage will I have any trouble with high pressures

 

[eelnoraa]

Yoke should be fine with United States's HP 3442psi tank.

 

[Nicholas_R634]

My yoke one says 230 bar.

 

[buddhasummer]

Might help:

is a 300 bar tank with a 232 bar valve ok?