Question SCUBAPRO S600 hose thread size for swivel

[Mordem]

Hi. Would like to install a 90 degree swivel to a SCUBAPRO S600 second stage.
Would like to know the size of thread been used to order the correct one.

Thanks!!!

 

[grantctobin]

DGX 90 Degree LP 2nd Stage Swivel: 9/16-Inch M = 9/16-Inch F

The 90 degree swivel attaches between the regulator second stage and its low pressure hose, routing the hose down the diver's chest and/or under the arm, which increases comfort and streamlining.

www.divegearexpress.com

9/16, as with almost all second stages

 

[Mordem]

Thank you!!! Will order the swivel now. Thanks again!

 

[tursiops]

Thank you!!! Will order the swivel now. Thanks again!

I'm curious what other sizes of swivels you might have seen?

 

[Mordem]

Thanks for the question.. the swivels I have seen do not have a thread size specified.

 

[tursiops]

Thanks for the question.. the swivels I have seen do not have a thread size specified.

Uhh, OK. Not surprised!

 

[Couv]

FWIW UNF 9/16-18 is the standard size.

I think AGA and Poseidon have different thread pitches.

 

[Mordem]

Specially AGA. Omniswivel has a dedicated swivel for that mask.
The 9/16"-18 Male to AGA Female Insert.

OmniSwivel, AGA Regulator SW-A

PN: SW-ADescription: OmniSwivel for AGA Stage Regulator 3 way 360deg rotation 9/16"-18 Male to AGA Female Insert Details: Solid brass construction for maximum durability. Oxygen Compatible Materials and O-Rings. Viton 75 Orings with Tribolube 71 lubricant

omniswivel.com