Sea Elite Boss RX650 Regulator

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Status
Not open for further replies.

BarracudaBill

Registered
Messages
6
Reaction score
0
Location
Georgia
# of dives
The regulator is two-years old (one owner) and has been on a total of three dive trips. It is in excellent condition, but as with any dive gear, it should be serviced before it is put back into service. This regulator has a factory installed braided hose which reduces pull on your mouth while diving.
Regulator Features: This regulator has a balanced diaphragm first stage and pneumatically balanced second stage. The first stage has 2 high-pressure ports and a swivel body with 4 low-pressure ports. The second stage has an adjustment knob that allows you to fine-tune the airflow plus a venturi assist switch that goes from the pre-dive position to a dive position to prevent free flow.
I am asking $100 plus $10 shipping (FedEx tracking) via PayPal.

P2225597.jpg

P2225601.jpg
 
Status
Not open for further replies.
https://www.shearwater.com/products/swift/

Back
Top Bottom