Rollin Bonz
*insert catchy phrase here*
- Messages
- 769
- Reaction score
- 728
- # of dives
- 500 - 999
I purchased these on from another scubaboard member, but when they came in, my hands wouldn't fit through them 
The opening is approximately 80 mm wide.
OS Systems / Si-tech dry glove system with rings, rubber gloves and liner. Comes with a complete set of rings, o-rings, *FREE* heavy rubber gloves, and set of liners. Also comes with some extras (1 extra rigid ring, 1 extra o ring, and an Akōna mesh bag).
I'm considering the gloves as *FREE* because...
1) They are mismatched size
2) After I got them, I found a couple of holes in one of them (the shorter one).
I have repaired the holes from the inside with 620 Adhesive and a latex patch, so they may work great for you, but you may have to pick up another set (generic heavy latex gloves can be sourced online or sometimes at local hardware stores for $10 or less) These would typically be installed on to existing latex wrist seals. If you can find another way to use them, more power to you.
$50 net to me and I'll cover the shipping to CONUS Glove size XL
The opening is approximately 80 mm wide.OS Systems / Si-tech dry glove system with rings, rubber gloves and liner. Comes with a complete set of rings, o-rings, *FREE* heavy rubber gloves, and set of liners. Also comes with some extras (1 extra rigid ring, 1 extra o ring, and an Akōna mesh bag).
I'm considering the gloves as *FREE* because...
1) They are mismatched size
2) After I got them, I found a couple of holes in one of them (the shorter one).
I have repaired the holes from the inside with 620 Adhesive and a latex patch, so they may work great for you, but you may have to pick up another set (generic heavy latex gloves can be sourced online or sometimes at local hardware stores for $10 or less) These would typically be installed on to existing latex wrist seals. If you can find another way to use them, more power to you.
$50 net to me and I'll cover the shipping to CONUS Glove size XL
