SOS valve internals

[stepfen]

Hello,
I recently bought a second hand Faber tank and it came with a SOS (San-O-Sub) valve that I am pretty sure uses the service kit shown below:

Does anybody know the dimensions of the copper ring and the small o-ring (bottom right one in the image above)?? The o-ring is the one that goes around the stem.

I want to see if I can get them easily in local market before I make the decision to open/inspect/clean the valve. Basically I need the copper ring to ensure that I can close again the valve. The o-ring will be nice to have too just in case.

Thanks

 

[Zef]

 

[Fibonacci]

I've rebuilt a couple of my Faber steel tanks fitted with SoS valves using kit DK1 from Maxdive
Scuba Valve Service Kit Rebuild Kit Spare Parts for Din/K Type KIT-DK1 | eBay

 

[stepfen]

Perfect. Exactly what I was looking for.

For completeness of the thread I copy paste from the link @Fibonacci posted above:

Each package includes as follows or shown on the photo,
1. 1pcs stem o-ring, ID6.07×W1.78, viton (Part # SR08-010V)
2. 1pcs stem teflon gasket, Ø6.3×Ø11.2×1.7mm, teflon (Part # TG07-2T)
3. 2pcs outlet o-ring, ID12.37×W2.62, viton (Part # DR12-112V)
4. 1pcs inlet o-ring, ID24.99×W3.53, viton (Part # IR14-214V)
5. 1pcs bonnet gasket, Ø11.2×Ø16×0.8mm, copper (Part # BG06-1C)
6. 1pcs valve seat&plug assembly, 1/2"-20UNF, brass, teflon coated, PVDF insert (Part # VS10BV-A)
7. 1set burst disc, 3/8"-24, 3/8" hex, Chromed brass, 3000psi service, 5000psi blow, 3 pieces (Part # BD11-4BP5000)
(In bold the parts I was looking for)

Cheers

 

[happy-diver]

Maxdive

Maxnificent!

 

[Scubagaskets]

Perfect. Exactly what I was looking for.

For completeness of the thread I copy paste from the link @Fibonacci posted above:

Each package includes as follows or shown on the photo,
1. 1pcs stem o-ring, ID6.07×W1.78, viton (Part # SR08-010V)
2. 1pcs stem teflon gasket, Ø6.3×Ø11.2×1.7mm, teflon (Part # TG07-2T)
3. 2pcs outlet o-ring, ID12.37×W2.62, viton (Part # DR12-112V)
4. 1pcs inlet o-ring, ID24.99×W3.53, viton (Part # IR14-214V)
5. 1pcs bonnet gasket, Ø11.2×Ø16×0.8mm, copper (Part # BG06-1C)
6. 1pcs valve seat&plug assembly, 1/2"-20UNF, brass, teflon coated, PVDF insert (Part # VS10BV-A)
7. 1set burst disc, 3/8"-24, 3/8" hex, Chromed brass, 3000psi service, 5000psi blow, 3 pieces (Part # BD11-4BP5000)
(In bold the parts I was looking for)

Cheers

You can find all those parts at Service Kits & parts for Tank Valves Scuba Tank Valves
If it is any help for you .

 

[stepfen]

You can find all those parts at Service Kits & parts for Tank Valves Scuba Tank Valves
If it is any help for you .

Thanks. I'll first have to open the valve to check its' interiors. The tank was practically new. The seller claimed less than 10 dives and from the look of it, it seems he has been honest.
BTW I just noticed you are based in Cyprus. It is great to know we have such specialized resources nearby.
All the best.