• Welcome to ScubaBoard

  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

SP Jets - sizing question

Discussion in 'Fins, Masks and Snorkels' started by rhwestfall, Sep 9, 2018.

  1. rhwestfall

    rhwestfall Woof! ScubaBoard Sponsor

    # of Dives: 200 - 499
    Location: "La Grande Ile"
    Looking to get a pair of Jets.... (the white camo perked my interest....)

    my foot size is US men's - 12 and is narrow

    I intend to wear them in warm water with a very thin 2mm water shoe (very little tread/sole), sometimes with a 2mm sock under it. I always seem to struggle with size charts...

    Anyone got a suggestion?
  2. Bob DBF

    Bob DBF Solo Diver

    # of Dives: I just don't log dives
    Location: NorCal
    If you can, find some to try, the large size can be found almost anywhere I've been. I use an XL for 10 1/2 with a heavy wet suit boot. Also the fin itself is larger as the foot pocket gets larger.

    rhwestfall likes this.
  3. Rooster59

    Rooster59 Solo Diver

    I'm a size 10.5 med width. I pool swim with size large jets and a pair of thin socks. For me, thin neoprene shoes with thin soles (watersocks?) are too much to fit into a large. I dive with XL jets and a 5mm neoprene boot with a sole. XL is quite a bit bigger than large. I would say try them on with whatever you're going to wear. My guess is XL.
    rhwestfall likes this.

Share This Page