Tank pressure

[Medicdiver0125]

What is the max tank pressure the xtx 200 with the fsr first stage can handle.

 

[tbone1004]

depends if it's yoke or DIN. I think they're designed to 4500 ish... why? What are you pumping up that high?

 

[Medicdiver0125]

It is for a din hook up, and just curious. I could not find it in the specs.
Thanks.

 

[mjr0112]

I think he was more asking the maximum service operating pressure for the XTX200. If he was to take his HP tank up to 3800psi range, is this to much/hard on the regulator?

 

[lsorensen]

The DIN connector is 7 thread 300BAR, so around 4500psi.

The yolk connector is of course max 232BAR, which is 3442 psi or something close to that. Whatever steel HP tanks tend to be at.

 

[tphillipp]

The DIN connector is 7 thread 300BAR, so around 4500psi.

The yolk connector is of course max 232BAR, which is 3442 psi or something close to that. Whatever steel HP tanks tend to be at.

Good answer lsorensen. This is correct.

Tom Phillipp
Product Mgr.
Aqua Lung / Apeks US