• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

VDH WING ON DSS PLATE

Discussion in 'Vintage Double Hose' started by scuba127, Aug 18, 2019.

  1. scuba127

    scuba127 Barracuda

    # of Dives: 200 - 499
    Location: Urbandale Iowa
    337
    42
    28
    Thanks rob.mwpropane. Pics would be great if you get the chance. Thanks again.
     
  2. rob.mwpropane

    rob.mwpropane Barracuda

    340
    164
    43
    Here you go.
    Dropbox - Backplate Wing - Simplify your life

    The upper band is slightly tight as seen in the pictures as in not in the middle of the slot. Just closer to one side. The screw hole in the webbing was not used and is off center about an inch. It didn't line up with anything. This bothered me a little at first (just OCD) but it has no effect on anything. The "grommets" built into the plate are tough as it is to slip the webbing through, no chance of it moving.

    Ask me anything.
     
  3. scuba127

    scuba127 Barracuda

    # of Dives: 200 - 499
    Location: Urbandale Iowa
    337
    42
    28
    Great! Thanks!
     

Share This Page