• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Vintage Parts wanted

Discussion in 'Vintage Equipment Diving' started by Turtleguy9, Jul 14, 2004.

  1. Turtleguy9

    Turtleguy9 Instructor, Scuba

    # of Dives:
    Location: Honolulu , Hawaii
    378
    1
    18
    Aloha Everyone
    I am again looking for parts. This time for the US Divers Aquamatic. I know it was only produced for a few years. Well its worth a try, could you look and see if you have any parts for the old US Divers Aquamatic reg? I am looking for part 1003-16 diaphragm cup.
    Thanks again.
    Turtleguy
     
  2. John C. Ratliff

    John C. Ratliff Instructor, Scuba

    # of Dives: I'm a Fish!
    Location: Beaverton, Oregon
    2,797
    1,348
    113
    Turtleguy,

    The Othe Vintage Diving Website has a link to an e-bay auction that includes an old Aquamatic regulator. If you win that bid, you will get a lot of good regs. The Aquamatic may have the parts you desire, and make for one regulator that works.

    There are three other regs on that bid; one Voit, one DA Aquamaster (the Voit is the same regulator with a different case), and one Jet Air. There are some other parts too. If bid on that and win, I would be interested in the Jet Air. The Voit regulator is missing its clamp ring, but that's not a big issue as the normal clips could be used.

    SeaRat
     

Share This Page