Weird mk10 on ebay?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Whitrzac

Contributor
Messages
914
Reaction score
952
Location
WI


Haven't seen one with this type of 'middle' section before
 

Attachments

  • mk10 4.jpg
    mk10 4.jpg
    93 KB · Views: 74
  • mk10 3.jpg
    mk10 3.jpg
    112.6 KB · Views: 78
  • mk10 2.jpg
    mk10 2.jpg
    114.1 KB · Views: 72
  • mk10 1.jpg
    mk10 1.jpg
    110.5 KB · Views: 72
It is a MK5 outfitted with the optional environmental kit Scubapro sold for a few years in the early 80s.
I have a couple of these and think it is a nice solution for sealing the MK5.

SP enviromental kits-page-001.jpg
 
The MK5 outfitted with the optional environmental kit by Scubapro is a great setup, and I have used one for years. However, when putting the silicone grease into it, you need to do that when it is under pressure. If not, the piston will move and the overfilled cavity will squirt the silicone grease all over, and even by the O-rings into the interior of the regulator.

SeaRat
 
https://www.shearwater.com/products/teric/

Back
Top Bottom