Will DIN 1st stages work with Halcyon 300BAR manifold?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

elgoog

Contributor
Messages
768
Reaction score
663
Location
San Francisco Bay area
# of dives
200 - 499
Hi -

I'm picking up a set of used doubles from CL and the posting has it with a Halcyon 300BAR manifold. Will the Deep6 DIN first stages work with that? I don't see any markings saying 300BAR on the reg itself - my Apeks regs do say 300BAR on the DIN fitting.

Thanks in advance,
elgoog
 
yes. very very few regulators are made/sold with 200bar DIN fittings and are usually reserved for argon/o2 bottles to get the smallest profile. If you see a "DIN" first stage being sold, you can pretty safely assume that it is 300bar, especially in the US. If there is one being sold at 200bar only, it will usually be marked in the title as 200bar
 
I use mine on 300 bar tanks. No worries enjoy the new tanks.
 

Back
Top Bottom