• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

XT2 Venturi dive/pre-dive switch doesn't move easily

Discussion in 'Dive Rite' started by Ean86, May 21, 2018.

  1. Ean86

    Ean86 Angel Fish

    # of Dives: 25 - 49
    Location: Wisconsin
    36
    12
    8
    I'm not sure what might cause this on my XT2 primary regulator but the venturi switch provides a lot of tension compared to my backup XT2 that hangs on my neck.

    I've got only 10 dives on the set (since October 2017). A few pool dives and a quarry. The backup XT2 is smooth as can be. What might cause the first to be so sticky and is there anything I can do besides taking it in to have someone mess with it?
     
  2. rongoodman

    rongoodman ScubaBoard Supporter ScubaBoard Supporter

    # of Dives: 200 - 499
    Location: Albany, NY
    5,142
    1,810
    113
  3. Ean86

    Ean86 Angel Fish

    # of Dives: 25 - 49
    Location: Wisconsin
    36
    12
    8
    Seems to be more stiff the day after the dive. I'm assuming something got in there and maybe cleaned out any lube that maybe is applied when assembled? Again, is there anything I can to myself to have it move nice and smooth or is this just something that happens with time from diving?
     

Share This Page