• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

xtx 200 2nd stage lever height adjustment

Discussion in 'Apeks' started by Medicdiver0125, Apr 18, 2012.

  1. Medicdiver0125

    Medicdiver0125 Nassau Grouper

    # of Dives:
    Location: Saint Clair Shores, MI
    82
    7
    0
    Hello just put a rebuild on my 2nd stage and it seems the lever height is very touchy. What I am saying is there is not much adjustment when setting lever height, keep in mind i am not talking about the breathing effort adjustment knob, I am talking about setting the actual lever height during a rebuild. Just wondering if this is normal? :confused:
     
  2. Fishpie

    Fishpie Instructor, Scuba

    # of Dives: I'm a Fish!
    Location: Fort Lauderdale
    1,686
    249
    63
    I don't believe the lever height is supposed to be adjustable.
    It is a set height determined by the tab angle.
    Screwing in the seat will effect the height but the reg should lock up before this becomes obvious.
     
  3. Medicdiver0125

    Medicdiver0125 Nassau Grouper

    # of Dives:
    Location: Saint Clair Shores, MI
    82
    7
    0
    Thanks that is kind of what I thought, there is a lever height adjustment it is just so small either way before it locks up that it seemed weird to me. The manual says to lower it until it is about 4mm below the case but if you go ANY further it locks up and if you go to far in the othe direction it locks up as well.
     

Share This Page