TimmyMac1
Registered
I just bought this Compressor Unit with less than 60 hours on the Pump. It is mated to the LE5000 Monitor. I need Owners manuals for both. The Compressor is a 8.5 CFM 7.5 HP arrangement running the pump at half speed(600 RPM) rather than 1200 which would give 16CFM with a 15 HP Motor
I own an Airgun Shop in Gardena Ca called Mac1 Airgun. I manufacture Airguns for Bench Rest & other competitions. I'm not a diver but I arrange Hydroes on a lot of SCUBA gear for people. I need to bone up on all aspects of the machine and operation of same so I do everything by the book.
I'm a third generation Airgunsmith running a business my Grandfather Les McMurray Started in 1932. Airgunners use a wide variety of Painball, SCBA SCUBA and Industrial Air & Nitrogen gear.
Any Help would be much appreciated.
mac1airgun@gmailDOTcom
Mac1 Owner Manual
Mac1 Ultimate Airgun Shopping
TimmyMac1
---------- Post added April 10th, 2014 at 07:26 AM ----------
I have been digging and it appears the Block was done by NACC North American Compressor Co. Serial Number is 1A039701 on the block and it is definitely NOT a Hamworthy Block. There is a Hamworthy block 4s12 if my info is correct. That came from a England CompressorSmith Colinbruce.
American Breathing Air Station Air 1
4 stage 6000 PSI
Pulleys seem to be running the compressor at half motor speed or less. 1200 RPM motor. 500-600 RPM Pump? 14" pulley on the pump fan and 6.5?" on the Motor.
Someone else has to have one of these. Any hint would be awesome. TIA
TimmyMac1
I own an Airgun Shop in Gardena Ca called Mac1 Airgun. I manufacture Airguns for Bench Rest & other competitions. I'm not a diver but I arrange Hydroes on a lot of SCUBA gear for people. I need to bone up on all aspects of the machine and operation of same so I do everything by the book.
I'm a third generation Airgunsmith running a business my Grandfather Les McMurray Started in 1932. Airgunners use a wide variety of Painball, SCBA SCUBA and Industrial Air & Nitrogen gear.
Any Help would be much appreciated.
mac1airgun@gmailDOTcom
Mac1 Owner Manual
Mac1 Ultimate Airgun Shopping
TimmyMac1
---------- Post added April 10th, 2014 at 07:26 AM ----------
I just bought this Compressor Unit with less than 60 hours on the Pump. It is mated to the LE5000 Monitor. I need Owners manuals for both. The Compressor is a 8.5 CFM 7.5 HP arrangement....Any Help would be much appreciated.
mac1airgun@gmailDOTcom
Mac1 Owner Manual
Mac1 Ultimate Airgun Shopping
TimmyMac1
I have been digging and it appears the Block was done by NACC North American Compressor Co. Serial Number is 1A039701 on the block and it is definitely NOT a Hamworthy Block. There is a Hamworthy block 4s12 if my info is correct. That came from a England CompressorSmith Colinbruce.
American Breathing Air Station Air 1
4 stage 6000 PSI
Pulleys seem to be running the compressor at half motor speed or less. 1200 RPM motor. 500-600 RPM Pump? 14" pulley on the pump fan and 6.5?" on the Motor.
Someone else has to have one of these. Any hint would be awesome. TIA
TimmyMac1