Fix latex seal to hollis fx100

[marc.collin]

hi

i have an hollis fx100 dry suit. i think the interior is a polyurethane textile.

what kind of glue i need to use to link the interior part to the latex seal?

thanks

 

[Tbar]

I just replaced the neck seal on my FX100 with a SiTech neck and the wrists with SiTech ovals on the weekend. I used heat tape.

See Fitting SiTech rings on Hollis FX100

I would trim the old seal back but not try and remove it. The polyurethane appears to be adhered to the suit after the seals and edge tape. If you try to remove the tape and seal then you will impact on the suites integrity. I did start to remove the seal on one of the wrists and found the outer material is very stretchy.

 

[marc.collin]

no glue?

 

[Tbar]

DRIS Dive Gear Dry Adhesive Drysuit Tape | Dive Right In Scuba - Plainfield, IL - Dive Right in Scuba

G-Dive Hot melt adhesive tape - 10-inch Donut & 1-inch Strips, Package of 5 sets | Dive Gear Express®