Anybody replace their stinger strap..

Discussion in 'Computers, Gauges, Watches and Analyzers' started by RAN, Sep 21, 2004.

  1. RAN

    RAN Angel Fish

    34
    0
    0
    what did you replace it with?
     
  2. GreenDiverDown

    GreenDiverDown Scuba Instructor

    3,138
    0
    0
  3. ScubaDadMiami

    ScubaDadMiami Scuba Instructor

    718
    1
    0
  4. paulwlee

    paulwlee Divemaster

    # of Dives: 200 - 499
    Location: San Francisco Bay area
    741
    0
    0
    Hmm.. Does the bungeed Stinger work well both on a bare wrist and also on a drysuit over a 400g Thinsulate undergarment? At the least I would think it will be a little strange to wear as an everyday watch.

    I second the X-straps. I and many others around me use the X-strap with their Stinger and like them. Great for wearing over both thick exposure protection and a bare wrist.
     
  5. jcramer911

    jcramer911 Guest

    4
    0
    0
    I also use the Waterborne strap on my Stinger. Works GREAT! I only use a 3mm suit now, but Im sure it fits on a 7mm. A while ago, it saved a Seiko dive watch during a haneous shore dive in St Croix. I got to shore (after 3 Urchin pricks) and saw my watch hanging by one pin - saved...by the Waterborne.
     
  6. Geezer

    Geezer Nassau Grouper

    # of Dives: 100 - 199
    Location: San Antonio, TX
    185
    0
    0
    Never lost a pin, but my Stinger is on a Waterbourne strap - just in case.
     
  7. joddie

    joddie PADI Pro

    # of Dives: 1,000 - 2,499
    Location: Sasebo Japan
    54
    0
    6
    I used the ss suunto band works fine...I just dont trust the mounting pins just my 2 cents
     

Share This Page