Last edited:
Closed: Apeks Dst 50
- Thread starter Rescue Diver68
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
TheHuth
Contributor
Can you email me pics? john@beyondvoip.net
OP
Photo uploaded
OP
Sold
Pao
Contributor
Here it is awaiting its transformation into a sidemount reg 
.
.
Last edited:
OP
Are you going to go Din? I am interested in buying the Yoke part back or trading for Din.
Pao
Contributor
Yes I am. But it's going to be a problem to ship as it is already in the Philippines with me. I just noticed a few interesting things about this reg. It looks like an old DST from an ATX 50 set because of the 1/2" LP port and the thick yoke retaining nut. It still has the original decal on the hydrostatic transmitter and I think it was manufactured early 2000 or late 90's. Either the decal was not changed or it has not seen service in a long time . However the IP is still rock solid at 137 PSI!
. However the IP is still rock solid at 137 PSI!
Pao
Contributor
You might also have a problem with the thick yoke nut. It won't fit some of my convertible DIN/Yoke valves.
Last edited:
OP
OK. I need one for an XTX200. Yes, it is a great breathing reg. and sturdy.
socarwest
Rescue Diver
Rescue diver68 if I'm understanding you correct you need a yoke for an Apeks xtx200. If so and this doesn't work out I have a one I'm fixing to take off my xtx200. Only wet one day. Pm if interested
Similar threads
