Closed G250 Graphite

Sold or no longer available

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

As per title. About to build this, couldn't help my self, I don't have an addiction I can quit anytime I want but just one more...

It will be fully serviced and updated. S/wing poppet, new spring, new orifice, new flow vane C clip and all new O rings.

Just pulled it apart and cleaned it, almost zero corrosion, face plate has scratches but not too bad, 6/10 (?) some micro mesh and elbow grease will pretty it up but I don't have the time right now.

$210 AUD ($135 approx USD). Shipping $40 AUD. I will only ship to the US as any other method of shipping is currently problematic.

Total $250 AUD PayPal Gift Family and Friends.

I'll post up photos this evening after I've built it.

Thank you for looking.

View attachment 798542
Nice. Shipping is a killer.

Micro mesh?
 
Yeah, but $25 USD isn't too bad for Int shipping compared with what you guys pay using USPS.

Yes, micro mesh, sand the scratches out. When I had time I'd do it but I've run out of time this trip.
 
Yeah, but $25 USD isn't too bad for Int shipping compared with what you guys pay using USPS.

Yes, micro mesh, sand the scratches out. When I had time I'd do it but I've run out of time this trip.
Thanks. I misread and thought it was $40 US. My bad.

Have any before and after pics of a reg you did the micro mesh?
 
There's a bunch of photos all over SB. When I get back to Oz and have time I'll link to some threads.​
 
Finished. Like I said face plate has scratches but not too bad, seen way worse and like I said before bit of sanding and they can come up very reasonable.

Cracking just on 1" at 135psi.

Cheers

IMG_3189.jpeg

IMG_3194.jpeg

IMG_3192.jpeg

IMG_3193.jpeg

IMG_3191.jpeg
 
And these -

1692625423121.png
 
https://www.shearwater.com/products/swift/

Back
Top Bottom