thomasj1107
Contributor
So my dive rite transplate came in with XT voyager wing. I’ve got it setup, and have a few questions. First, where does the waistband typically sit when you dive? I got the correct sizing and I’m following the directions that you should be able to just touch the plate top by reaching behind your head, and the waist band sits just about belly button height of a little higher, is that odd?
Second, when I attached the wing by putting the dual tank straps through the plate, I know it will be tighter and all with a tank on, but it seems like there is a lot of play still and the wing drifts downward right now because nothing is holding it TIGHT tight. There are holes in it that line up with holes on the plate, is it meant to be held somewhat in place with something that goes there to hold the wing at least somewhat in the same place?
Second, when I attached the wing by putting the dual tank straps through the plate, I know it will be tighter and all with a tank on, but it seems like there is a lot of play still and the wing drifts downward right now because nothing is holding it TIGHT tight. There are holes in it that line up with holes on the plate, is it meant to be held somewhat in place with something that goes there to hold the wing at least somewhat in the same place?