Hot Shot Fin Issue

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Feejr

New
Messages
2
Reaction score
1
My wife and I use Hot Shots for travel. We have 2 pairs, out of warranty. On one fin, the softer blue material is separating from the firmer grey material starting at the tip if the fin. Any suggestions from AL as to how to remedy this?
IMG_5221.jpg
 
Kyle,
Thanks so much for your extremely rapid response and resolution.
 
If AL doesn't remedy the obvious manufacturing or design defect, drill small holes along both sides of the split and stitch it with zip-ties.
 
https://www.shearwater.com/products/swift/

Back
Top Bottom