How to mount the gopro 12 (underwater case)

[TTPaws]

So I just purchased a gopro 12, along with the underwater case. The pic shows my current setup. I want to mount the gopro between the lights. I was looking at a double ball mount with a butterfly, but it would raise the camera too high above lights. I'm also thinking I could drill out one of the gopro mounts.

I am open to suggestions.

 

[mattfish]

Could you use a tripod mount with a screw through one of those holes on the bridge?

https://www.bhphotovideo.com/c/product/1629843-REG/ulanzi_2373_gp_10_tripod_mount_adapter.html

 

[VsubT]

Seems like a simple tripod adapter with a 1/4” screw through the bar from below would work. Something like this:

https://a.co/d/bRfm0YP

Is this along the lines of what you’re picturing?

Lance

ETA: Just realized @mattfish suggested a similar approach. Apologies for the duplication.

 

[TTPaws]

Thanks guys, turns out I had a tripod mount that came with I didn't see. I ended up using a 1/4-20 hex head, although the thread in the bar is fine and the thread in the tripod mount is course. So I used a course hex head and used force Looks good, so thank you again.