JJ CCR Banjo o-ring specs?

[keysdvr]

Hi. Was going to run my banjo(s) through the unltrasonic, as they are corroded from saltwater. I was hoping to replace the o-rings afterwards, but can't find a proper match. The two smaller (inner) ones are between a -011 and -012, and the single outer ring is thicker than -012. Does anyone know the proper spec / ID number of the banjo o-rings? Thanks!

 

[Rayk]

Here you go;

 

[keysdvr]

Awesome! Thanks!

 

[Matan]

I assume the outer one should work with regular 011 - we use a first stage plug with 011 to plug the DIL MAV hole for the GUE configuration - no leaks so far.


Matan.

 

[rsingler]

Keep in mind that the banjo bolt changed...