EberWolf
Contributor
I've been using the Vintage Double Hose Argonaut 32# wing and a SS Freedom Plate for a few years. I recently picked up a vintage plate from Subsea sports to go with my Argonaut Kraken.
I contacted Eric Sedletzky (freedom plate) and he pointed out that the tank band slots are wider ( 3 inches inside edge to edge) between the tank band slots than some wing.
I'm looking for a wing with around 20#'s of lift. A little more or less is fine. But the tank band slots need to fit the 3 inch slots on the plate.
Primary SCUBA Reels, Backplates, Spearfishing gear
US made stainless SCUBA primary reels, SCUBA BCD backplates, spearfishing equipment, and Vintage SCUBA gear
www.subseasports.com
I contacted Eric Sedletzky (freedom plate) and he pointed out that the tank band slots are wider ( 3 inches inside edge to edge) between the tank band slots than some wing.
I'm looking for a wing with around 20#'s of lift. A little more or less is fine. But the tank band slots need to fit the 3 inch slots on the plate.