Looking at purchasing a BP/W setup. I really like the Hollis S38 LX wing and want to use it with an Elite 2 Harness.
I dive with a 7mm wet suit in cold water, weigh just short of 200lbs, will be purchasing a stainless steel backplate, and will also purchase the STA. Will this wing have enough lift diving with OMS/Faber steel 112 single tanks? I read somewhere that the S38 only has enough lift for a 15L tank. The steel 112's are 17L. So I'm not sure what I should buy - the S38LX or the C45LX, but I also don't to have a big wing like the C45 wrapping around the tank. I will not be diving doubles at all.
Thanks for the help.
I dive with a 7mm wet suit in cold water, weigh just short of 200lbs, will be purchasing a stainless steel backplate, and will also purchase the STA. Will this wing have enough lift diving with OMS/Faber steel 112 single tanks? I read somewhere that the S38 only has enough lift for a 15L tank. The steel 112's are 17L. So I'm not sure what I should buy - the S38LX or the C45LX, but I also don't to have a big wing like the C45 wrapping around the tank. I will not be diving doubles at all.
Thanks for the help.