Regulator free flow and near panic

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Scubapro Air1, Pilot, and D-series purge on the back (below the chin, facing the diver). Neat regs, but definitely a bit different.
Here are the regulators James79 is talking about, the Scubapro A.I.R. 1 (below the manifold) and their Pilot regulators.

fullsizeoutput_29b4 by John Ratliff, on Flickr

Now, about kinking the braided hoses, that may decrease the life of those hoses. I know that there was a problem with the interior of some of those earlier hoses coming apart, so I would not kink those hoses unless it is a last resort.

SeaRat
 

Back
Top Bottom