Source for 19mm Yoke Nut Socket?

[tech3324]

Looking for a shallow 19mm socket for torquing HOG D1 yoke retainer. Seems to require a 6mm hex or 1/4" square drive on the socket to fit through yoke screw hole. I found this one from Thailand Yoke Nut Socket 19 mm, but wondering if I'm overlooking some cheaper/simpler tool for the job. I can tighten the retainer with a box wrench but can't use a torque wrench.

 

[grf88]

A large adjustable wrench, a luggage scale and a little bit of math and the problem is solved.

 

[tech3324]

A large adjustable wrench, a luggage scale and a little bit of math and the problem is solved.

That's what I ended up doing, 9" long box wrench, digital scale, and pulled to 13lbs which should be about 120in-lbs if I did the math right.

I just wanted the socket because that's the "elegant" solution and I get to use the torque wrench.