Suunto Vyper Oring size/place to buy

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Suunto or I should say AquaLung and its dealer doesn't want you to be able to get the O Rings the ORings sizes were listed in the earlier manuals but seens have been removed.

The standard sizes used by O‐ring Warehouse and the other major O‐ring suppliers in the United States defined by Aerospace Standard AS568B,The the O Rings Size is #026 (CS) (Cross Section) 1.78mm (ID) (Inside Diameter) 31.47 (Sha) (Shore A Hardness) of 70 Material Nitrile (Buna) Black Temp Range -30 to 200 Degrees

The Transmitter O Ring are Metric Size O Rings The International Metric Size# M2x25 (CS) (Cross Section) 2.00mm (ID) (Inside Diameter) 25.00 (Sha) (Shore A Hardness) of 70 Material Nitrile (Buna) Black Temp Range -30 to 200 Degrees

Aerospace Size Standard for O‐rings

T he O Rings were size and confirmed at the Saint Louis Boeing Aerospace Testing Lab

Several of the Oceanic Aeris and several other Dive computers uses the same O Ring and Batteries The CR2450 3.0 Volt But be careful on the transmitter batteries They need to be CR1/2 AA #.0 Volts NOT the 3.6 Volts ((Which Radio Shack Has)) it will burn out or up the transmitter

This O Rings are available for under $3.00 the battery under $5.00 Battery Plus will rape you for $10.00
Wallgreens carry the CR2450 3.0 Volt button battery

YOU MUST USE THE SILICON GREASE ON THE O RING REMEMBER A LITTLE DAB WILL DO YA

Don't Let the dive shop's rape you any longer
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom