yupito
Contributor
Not really. Good, thoughtful advise by a cyber diver!
Transmitter shows same pressure for several minutes
- Thread starter DeltaWardog
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Not really. Good, thoughtful advise by a cyber diver!
yyidus
Registered
- Messages
- 49
- Reaction score
- 0
There's another thread about whether you should dive with backup SPGs when using AI. The OP was not asking for advice about alternate SPGs. You've made your point now please move on.
As for the OP question. I've never seen that happen. It could also be a problem with the first stage HP port... I'd definitely be alert if you plan on diving with it again. If it seems to be misbehaving, you should probably just end the dive.
If it's going to cost you $100 to repair, plus sending it in and whatnot, you may want to consider just buying another transmitter. LP has them listed used at around $200: Oceanic Atom VT Pro/VT3 Transmiter Only (refurbished) from LeisurePro.com
As for the OP question. I've never seen that happen. It could also be a problem with the first stage HP port... I'd definitely be alert if you plan on diving with it again. If it seems to be misbehaving, you should probably just end the dive.
If it's going to cost you $100 to repair, plus sending it in and whatnot, you may want to consider just buying another transmitter. LP has them listed used at around $200: Oceanic Atom VT Pro/VT3 Transmiter Only (refurbished) from LeisurePro.com
Similar threads
