snoopylaups
Registered
Does anyone experience in E-PL5 with the S&S YS-01 under the TTL mode?
Could you please teach me how to set the camera?
Thank you.
Could you please teach me how to set the camera?
Thank you.
E-PL 5 work with YS-01 using TTL mode
- Thread starter snoopylaups
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OP
snoopylaups
Registered
I have E-PL5 with 10 bar housing & 2 x S&S YS-01 strobe, but the strobes seems can't work TTL with my E-PL5.
Anyone have this experience??
Thanks.
Furnari
Contributor
Do you have the flash on the camera set to fill flash?
OP
snoopylaups
Registered
PEDiamond
Registered
set strobe to TTL, set camera to fill flash...should work....I have this combo and it works for me.....
OP
snoopylaups
Registered
wii try tonite, thanks PEDiamond ^^
PHIL RUDIN
Contributor
This strobe works well with all of the current Olympus cameras. I did a review of the strobe for UWPMAG.com, issue #69 if you are interested.
I like using the strobe in manual mode as well as TTL. I set the on board strobe to manual at 1/64th power to save the camera battery and set the YS-01 to manual and use the control dial to raise and lower power. This works very well for both W/A and macro once you get the hang of shooting in manual.
Phil RUDIN- SFUPS
I like using the strobe in manual mode as well as TTL. I set the on board strobe to manual at 1/64th power to save the camera battery and set the YS-01 to manual and use the control dial to raise and lower power. This works very well for both W/A and macro once you get the hang of shooting in manual.
Phil RUDIN- SFUPS
Similar threads
