Scobapro digital 330 - issue

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Messages
2
Reaction score
0
Location
UK
# of dives
0 - 24
Hello ladies and gentlemans,
anyone have digital 330 bottom timer and experienced an issue like diving mode on surface?
my brand new after few weeks started to show depth (blinks) and temp.
Does anyone have an idea how to reset that lovely device or simply just needs service (hopefully not as I'm departing on Saturday:cry::bounce:)?

Thanks a lot for Your help!
Regards,
mike
 
The unit is completely sealed and as far as I know it is not serviceable.
Back to the shop and exchange for a new one if is still under warranty.
So you better act fast.
 
Not serviceable. Mine did it a couple of times, and the only thing that helped was to soak it in fresh water overnight. It stayed in dive mode but stopped blinking, worked fine during the next dive, and shut down thereafter.
 
@ Mike - They have a tendecy to that when in close proximity to mobile phones, especially new units. The only way to switch it off is to take it for a dive (below 10m), it will switch off after you surface.

The battery is good for 10years I think.
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom