Search results

Try SMP Ltd SMP | Home in the UK - works out around 8GBP (approx $13) for a sheet where you can cut around 30 pads out from. Great service too. Postage might be more than the pads though... ;)

Genius! Ok, everything all good now, one way valve/check valve fitted and now perfect... Thanks Craig and Rcontrera for you tips, feeling a bit stupid for not thinking a little outside the 'coltri box' when it came to the check valve idea... Thanks again, now off to fit this little mod to the...

The filter (SC000430) and seperator are standard coltri... The seperator is one unit but split - bottom half is 1st to 2nd stage and top half post 3rd stage. Today I stripped the pump unit down, cleaned and re-built, found a couple of water droplets in the 2nd stage cylinder and a bit of...

Filters are being run for 20hours, ambient temp is 30 degrees C (manufacturers recommended is 23hrs at 30degrees.C) Drains are set to open every 3mins for 6seconds which is twice as frequent as manufacturer recommends. The compressor has 1800 hours useage in this current set-up, the excess...

have a look at scubaengineer.com advanced compressor courses in thailand... bit of a trek for you though. Also get your hands on the workshop manuals and have a good read through... google!!!

Just repaired a blocked HP Auto drain on MCH16 that was used for 5 hours unknowingly with it not functioning... The filter was completely saturated with visable water droplets on filter cartridge. However, after rebuilding the HP drain solenoid, we still get excess water in filter...

Hi guys, can anyone tell me how many spacers should be on the crank of a Coltri MCH16...? The coltri schematic diagram shows three, however I have found several units with only 2. I do not have that much faith in the coltri schematic as it shows an impossible order of fitting roller bearing...

Can anyone advise me on if it is possible to re-pack the Bauer Securus range of filter cartridges? The cartridge is a D-81477. Of course the official Bauer answer is 'No'.... We already repack all our own filters on Coltri and Bauer machines without Securus, and so also want an economical...