Search results

  1. J

    Canon G7X Mark III - Initial Thoughts

    the g5x ii has slightly longer zoom which will be handy especially with a macro lens. it will let you get even closer than the g7x iii. hopefully there will be more housings made for this model.
  2. J

    poseidon xtream second stage good condition

    looking to buy just the 2nd stage regulator only should be good condition external/internal
  3. J

    Sony RX100 underwater housing Meikon brand *new & cheap*

    pls see here Meikon Meike NB Sony RX100 Underwater Waterproof Housing 40M | eBay user reviews http://www.dpreview.com/forums/post/51121271
  4. J

    Apeks Vs Poseidon

    is there a working range? apeks tx50 manual states 9-10bar ip which is 130-145psi. will be for recrea diving not beyond 40m depth.
  5. J

    will apeks tx50 1st stage work with poseidon jetstream 2nd stage?

    the jetstream mk 3 says that valve technology is upstream. i do not think that my apeks tx50 has that.
  6. J

    will apeks tx50 1st stage work with poseidon jetstream 2nd stage?

    hi, any tech guy can tell me if this combo will work? read that poseidon requires 10bars, the apeks 1st stage does 9-10 bars. also whether the difference in upstream and downstream value will cause any issues?
  7. J

    Apeks Vs Poseidon

    will a poseidon jetstream work with apeks tx50 1st stage? i have an apeks setup now. wanting to change to poseidon for recrea diving. spotted a jetstream 2nd stage on sale.
  8. J

    Short V. Regular Hose Regulator

    beanojones, how tall are you? just for comparison since you are able to use 36" underarm. does it become uncomfortable when you look up? regular or flex hose? i am 5' 5". thinking of using 36" flex hose.
  9. J

    Short V. Regular Hose Regulator

    would a 36" hose underarm config with angled regulator be too short or still fine. should i choose a 70 or 90 degrees angle adapter?
  10. J

    apeks tx50 question about changing hose size

    i have another idea which i think i will do. will get a blanking plug for the 1/2 inch port and use the 3/8 inch port direct as i am using a inflator alternate air source. i tested the 2nd stage and was able to fit a 3/8 inch hose to it like what you said. will there be much difference in air...
  11. J

    apeks tx50 question about changing hose size

    hi all, my tx50 uses the 1/2 inch port and hose for my primary regulator. was looking at changing it to the flex hose setup. most places sell the normal 3/8 inch ones unless i buy the apeks hose which is very expensive. i understand that if i were to use a 3/8 inch hose, i will need a 1/2 to...
  12. J

    DIY Straps for Force Fins

    would like to see the pics too. email gt at mercurycube.com
Back
Top Bottom