trickkykidd
Contributor
Help me clean out some space on an unfinished project. Well over $1000 in parts alone.
3 complete Scooter bodies in original black plastic cases
1 motor is bad but rebuildable the other two should be working (1 was tested before put away)
1 body has reinforced light plate and bulkhead out of thicker lexan ($250+ from dpvrepair.com)
I started by replacing all the hardware with stainless
motor board was replaced and reassembled.
Bag of extra o-rings and parts included.
May even have some extra handles beyond the 6 that are attached.
needs shaft and brushes inserted and 1 scooter should be good to go with batteries.
Hit me up with an offer via PM. !! Please something more than the parts cost.
Will ship at buyers expense.
3 complete Scooter bodies in original black plastic cases
1 motor is bad but rebuildable the other two should be working (1 was tested before put away)
1 body has reinforced light plate and bulkhead out of thicker lexan ($250+ from dpvrepair.com)
I started by replacing all the hardware with stainless
motor board was replaced and reassembled.
Bag of extra o-rings and parts included.
May even have some extra handles beyond the 6 that are attached.
needs shaft and brushes inserted and 1 scooter should be good to go with batteries.
Hit me up with an offer via PM. !! Please something more than the parts cost.
Will ship at buyers expense.
